Best Value - Performance Mini Metal Gear Servo for your FPV Plane
- Ball bearing - Digital with MOSFET Drive- Metal gear
High Efficiency Brusless Motor for Skywalker 2013/2014, X8
Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g
90 Degree Adaptor for SMA Antenna
This is the first 5.8G solution support both the...
Tested to 2km with Aomway 500mw Transmitter and Aomway Cloverleaf Antenna
HQProp 5x4. 6x3 Durable Prop 2CW 2CCW - PINK
RP-SMA JACK to SMA PLUG 90 Degree Adaptor allow you to use RP-SMA...
GEMFAN 11X7E Nylon Propeller
EMAX ES3104 17g Metal Gear Analog Servo
HQProp S5x4x3B Durable S Prop 2CW 2CCW - Blue
TBS Vendetta 240 Racing Quad
Warning: Last items in stock!
The Vendetta from Team Black Sheep is one awesome piece of racing quad engineering.
This ready to fly 240 size full carbon fiber monocoque racer has it all. Quick swap arms, solder-free repairs and it comes with the new Triumph antenna in combination with the CORE Pro OSD and Unify Pro VTX, what's more every parameter of the Vendetta is fully configurable via your R/C sticks.
The Vendetta has a custom-made carbon fiber layup design with the arms machined from flat 3.5mm thick carbon fiber plates and fully chamfered to prevent delamination. The body is an engineering marvel that starts its life as a hand molded tubular 2mm carbon fiber master which is then trimmed down by a 4-axis CNC machine to save weight.
The Vendetta comes pre-tuned and the calibration wizard takes you through the setup steps. Then you simply strap in a receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls and when it's all done, get ready for some serious flying.
Are you ready to get in the pilot seat of the hottest quad produced by Team Black Sheep to date? The Vendetta! Go for it!
• 240-sized B&F FPV Racer
• Quick-replace 3.5mm carbon fiber arms, MT30 connectors
• Cobra CM2204/2300kV Motors, HQ 5x4x3 Props
• TBS PowerCube with fastest F3 board available, 2-6S capable Bulletproof 30/50A ESCs
• Compatible with PPM, SBUS, XBUS, Spektrum R/C systems
• Fully configurable via OSD, no PC required
• GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30-degree variations
• Lost model alarm
Weight: 410g (without Battery or HD camera)
6 Channel Radio
Full carbon fiber monocoque, quick swap arms, solder-free repairs, ready to fly as 240 size fpv racer, for 5" props. But it doesn't stop there! Sporting the brand new TBS Triumph Antenna in combination with the TBS CORE Pro OSD and TBS Unify Pro VTX, the TBS Vendetta allows you to configure every parameter of your FPV racer via R/C stick commands! Each drone comes tuned and test-flown by our professional tuning expert, Magnus. Install a receiver, strap on a 4S battery and the TBS VENDETTA will tear a hole into the sky, and you're coming along for the ride!
All structural parts on the TBS VENDETTA are made out of custom-made carbon fiber layup. The arms are made from flat 3.5mm thick carbon fiber plates, machined to precise standards on a 4-axis CNC machine, fully chamfered to prevent delamination. The body is a pure work of art, which starts its life as a hand molded tubular 2mm carbon fiber master. It is trimmed down by a 4-axis CNC machine to save weight. Smooth and rounded edges in the CNC cuts are our way of showing off. The matte finish is sand blasted, because attention to detail requires it.
The entire FPV racer is built around the idea of countless self-contained parts working together hand in hand for a unified user experience. Starting from the TBS ZeroZero FPV camera, to the TBS POWERCUBE and TBS CORE PRO, everything is repairable without a soldering iron, and with just two tools. This does not prevent you from configuring all tuning parameters via the built-in OSD, to changing VTx channels or power levels.
The TBS VENDETTA comes pre-tuned, and the R/C Calibration Wizard takes you through the setup steps. Just strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls (both R/C receiver, goggles and FPV video receivers are sold separately). The arms arrive in detached state to allow quick access to the R/C receiver bay the first time.
From the structural rigidity to the over-powered ESCs, everything has been developed with your progress as a pilot in mind. A step to 6S with bigger motors to gain ridiculous power-to-weight ratios, custom arms for higher efficiency motors and props, or simply a different motor setup to suit your tastes are easily possible, thanks to the MT30 connectors and the quick swap arms. You can even carry different pairs of arms with unique motor and props combos installed for every occasion, and mount what you fancy!