Best Value - Performance Mini Metal Gear Servo for your FPV Plane
- Ball bearing - Digital with MOSFET Drive- Metal gear
High Efficiency Brusless Motor for Skywalker 2013/2014, X8
Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g
90 Degree Adaptor for SMA Antenna
This is the first 5.8G solution support both the...
Tested to 2km with Aomway 500mw Transmitter and Aomway Cloverleaf Antenna
HQProp 5x4. 6x3 Durable Prop 2CW 2CCW - PINK
RP-SMA JACK to SMA PLUG 90 Degree Adaptor allow you to use RP-SMA...
GEMFAN 11X7E Nylon Propeller
EMAX ES3104 17g Metal Gear Analog Servo
HQProp S5x4x3B Durable S Prop 2CW 2CCW - Blue
MATEK RGB LED WS2812B-8, Controled directly from your flight controler
Warning: Last items in stock!
Make your own little LED strip arrangement with this stick of WS2812B LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you’re ready to rock.
The LEDs are ‘chainable’ by connecting the output of one stick into the input of another. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. An 8MHz or faster processor is required.
Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested.
51mm/2″ x x10mm/0.4″
Naze32 LED Strip with CleanFlight
AVR, Arduino, PIC, mbed, etc